CW-3.5
Cinewhoop 3.5
3.5-inch ducted recon quadcopter
A ducted 3.5-inch frame built for confined-space flying — indoor corridors, stairwells and close-quarters recon — where open props aren't an option.
Notoxytech markets the Cinewhoop 3.5 as the workhorse of its ducted category: enclosed prop guards for proximity and indoor safety, a quieter, lower-visibility signature than an open-frame quad, and enough wind resistance to still be flyable outdoors.
Video is switchable between analogue and digital on the same airframe, and the flight stack runs the same GPS-with-failsafe navigation as the rest of the range, with Position Hold, Manual/Angle/Acro and RTH modes.
One figure worth double-checking: the product literature's specification table is headed “Shakti 10-inch FPV with Thermal Camera” even though every other row — 3.5-inch size, 2,800 mAh 4S battery, propeller-guard airframe — clearly describes the Cinewhoop. We've used the numbers as given and corrected only the heading.
Specification
AIRFRAME
- Class
- 3.5-inch cinewhoop
- Build
- Composite carbon fibre with propeller guard
- Navigation
- GPS navigation with failsafe
- Navigation modes
- Position Hold, Manual/Angle/Acro, RTH — configurable
PERFORMANCE
- Flight time
- Up to 20–25 min
- Cruise speed
- 45–60 km/h
- Max burst/dive
- 100 km/h
- Range
- One-way, up to 5 km LOS
- Max altitude
- 500 m AGL
POWER
- Battery
- 4S 2,800 mAh Molicel Li-ion
- Payload capacity
- Optional
VIDEO LINK
- Transmission
- Analog / Digital, switchable
- VTX
- Analog / Digital
Configurations
All three share the same airframe, spares and ground segment. Changing configuration is a fit, not a new aircraft.
ANALOG LINK
Analog VTX
Lower latency, simpler failure mode, shorter effective range.
DIGITAL LINK
Digital VTX
Cleaner image at range, small added latency.
What is in the box
- Ducted 3.5-inch airframe with propeller guards
- GPS/GNSS flight controller with failsafe RTH
- 4S 2,800 mAh flight pack
- FPV goggles and switchable analog/digital VTX
- Laptop-based mission planner for live telemetry
Confirm the specification heading with Notoxytech before publishing — see the note above.